Let’s say you own the latest version of the CPU or have got a great one already but want to see if you can get a little more performance out of it?! You searched all over the Internet for a solution for-“How to tell if a motherboard supports overclocking?” and came across the word “overclocking“ many times, and you’re right here!
Let me take you gradually into what overclocking is, and if your motherboard supports overclocking.
What is Overclocking?
With a higher clock speed, a CPU can complete more operations per second, allowing your computer to run faster.
Even when created on the same production line, different computer processor chips work at different rates.
Companies manually reduce the speed of the chips in order for them to perform slower. However, the chips were originally designed to operate at a faster rate.
Overclocking is a technique for getting more performance out of a CPU or GPU that has been throttled down by the manufacturer. Overclocking is simply increasing the clock rate of a computer’s running speed over what the manufacturer has permitted. Now, your CPU will run faster than the manufacturer intended, providing outstanding performance equal to higher-priced CPUs without the actual cost.
Overclocking is most commonly utilized to improve the performance of a critical chip or subsystem, such as the primary CPU or graphics controller. Overclocking allows you to boost the performance of chips that have begun to run slower.
Overclocking is supported by just a subset of Intel CPUs and all newer AMD Ryzen CPUs.
How to tell if a motherboard supports overclocking?
Overclocking may not be difficult to set up. But it becomes a little chaotic when trying to get it done on a motherboard.
To enquire how to tell if a motherboard supports overclocking, selecting the appropriate motherboard is critical. Failure to do so may result in severe hardware damage.
A motherboard with a “Z” in the chipset name must be considered for Intel CPUs. Both the Z170 and Z270 motherboards are compatible with Intel’s new i7-7700k processor.
Most of their motherboards support overclocking, but you should check the manufacturer’s website before making a purchase.
Can All CPUs Be Overclocked?
NO. The multipliers on the majority of CPUs and motherboards are locked, making overclocking impossible.
Factors To Look For Overclocking Motherboard
- Having a properly-designed motherboard with a fast enough bus, as well as a fan or other cooling equipment, will keep your system cool enough.
- Heat sinks are effective. To assist remove the heat faster, purchase an additional heat sink or a more powerful CPU fan.
- The use of thermal grease is essential. Without a layer of thermal grease, even the greatest heat sinks will not be able to transport heat from the CPU properly. The thinner the coating, the better; it forms an optimum interface between the CPU and the heat sink, allowing for the most efficient heat dissipation. Apply the grease with gloves and avoid getting it in your eyes!
- Water cooling is preferable to air cooling. Any heat generated within your computer’s case will be absorbed by the water, which will then be pushed out and discharged into the atmosphere.
- Another factor to look at is the overclocking capabilities of the motherboard you have. Overclocking is possible on any motherboard with the overclock capability; however certain motherboards have built-in tools to make the process easier.
How to Overclock a CPU?
You’re almost ready to begin the process of overclocking. There are three options available:
- Make use of the motherboard’s built-in overclocking features. For more information, see your motherboard’s instructions. This method is good for individuals who are new to overclocking. Also, it may not always produce the best results in terms of performance. If you’ve ever used automated overclocking before, you’ll notice that it tends to raise the voltage too high in a short span of time, causing your PC to overheat and become unstable.
- For manual overclocking, use the software that comes with your operating system. This is the only most straightforward method of GPU overclocking.
- Overclock manually in the BIOS of your motherboard. It’s more reliable, and you’ll get significantly better performance if you use the BIOS to overclock.
CPU-Z, Prime 95, and real temp can be used to see if your system is suitable for overclocking
Challenges and probable threats while overclocking CPU
- As we know, Overclocking is great, but it does have a few drawbacks which may or may not affect the components of a motherboard. With the given accessibility of current overclocking, the risks aren’t nearly as significant as they once were, but they should still be considered.
- You’ll need an overclock-capable motherboard to go with your overclock-capable CPU.
- Do not exceed 1.25v and stay at a level that the motherboard allows. Most motherboards, however, will let you set anything up to 1.4v before warning you about the danger.
- Overclocking also increases the amount of power going from the motherboard to the CPU. The Voltage Regulator Module is a part of the motherboard which is responsible for delivering that electricity (VRM).
- Remember that any motherboard having the letter “Z” on it, such as the Z77, Z87, and Z97, are Intel motherboards. For Advanced Micro Devices (AMD), motherboards do provide a few forms of overclocking.
- When you combine a high consumption CPU with a low-cost motherboard to overclock it, you are definitely damaging your motherboard. Intel’s current basic chipsets don’t support overclocking.
Is Overclocking dangerous?
Before, overclocking was done with components that have been used for a long time, which means they are practically old for the safer side of damaging newer components. As now the risk of damaging the health of the components is comparatively lower with all technology, overclocking is far safer than before.
Overclocking a CPU is, as you can see, a simple operation. Prior to overclocking, do some research on your CPU to have an understanding of its limits and potential complications that you may encounter while overclocking it. You can also go to several Computing Forums to debate your chip’s potential overclocking capacity or to see what others have done with similar CPUs. Change settings in small increments and conduct at least a short flash of tests following any changes. Now, I hope you got answer of how to tell if a motherboard supports overclocking?