Motherboard

Does The Motherboard Comes With SATA Cables?

Are you searching- “Does The Motherboard Comes With SATA Cables?” While going in for a new motherboard, you are often confronted with many questions such as if the Motherboard is good enough for you, will it have all the necessary parts, and most importantly, will the Motherboard come with cables to connect it with the rest of the PC components? Depending upon the price paid, a motherboard box package comes with:

  1. The Motherboard, which comes in a static bag for bench testing.
  2. The I/O Shield, which is a thin metallic plate to cover the I/O ports of the Motherboard as they are board-specific.
  3. SATA Data cables

So let us discuss and clear the air about these questions. First and foremost is:

Does Motherboard comes with SATA cables?

Does The Motherboard Comes With SATA Cables

The answer is yes. Motherboards come with cables. The Motherboard usually comes with 2 SATA cables. This is basically enough to start with, such as connecting the primary hard disk drives. To be more specific, motherboards come with SATA cables for the storage drives and not necessarily cables for running the PC. Also, the Motherboard may support up to 6 SATA slots, but the Motherboard may come with only 2 or 3 SATA cables. Please note that power cables, video output cables, USB cables, etc., do not come with the Motherboard.

So, if the Motherboard has only 2 SATA ports, then there is no need to be disappointed if you need more. There is always the option to connect an external drive via USB if you need to keep photos, videos, etc. However, it is best to go in for a new motherboard with multiple SATA ports for games and other programs. Onda has two great motherboards. For example, the B250 D32-D3 and B250 D32-D3 IPFS have 32 SATA ports each.

However, these motherboards are not readily available everywhere for sale. The best option, therefore, is by using a SATA Expansion Card or SATA Port Multiplier device, you can also add more SATA ports to your Motherboard. This card is a PCle device that connects to a PCle slot. It features multiple SATA connectors to connect the storage devices.

What is a SATA power connector on the Motherboard?

A SATA power connector is one of the computers’ standard peripheral power connectors. It is the standard connector for SATA-based hard and optical drivers. Another point worth mentioning is that all SATA ports on the Motherboard are of the same speed, but not all motherboards support the same SATA speed. So no worries about which serial ATA port to connect the device to a motherboard as all the ports run at a similar speed.

Where is the SATA port on the Motherboard? 

Usually, it is seen that several SATA connectors are clustered together in a row depending upon how many of them are. They are present along the edge behind the PCI/PCIe slots. In short, the SATA ports are present on the lower right side of the Motherboard.

The SATA ports are referred to as connectors as they are used to connect the hard drives to the Motherboard. Two SATA ports on the Motherboard are designed to carry data between the Motherboard and the drive by using the SATA data cable. See left in the device selection panel on the motherboard section to identify a SATA port. The window’s right side will show the available SATA ports.

The SATA port is a small port that measures around 1.5 cm x 0.4 cm in dimensions. It comes with specific notches and a distinguishable L-shaped seven-pin connector. For example, if 6 GB/s is written near the port, it means it is SATA 3 standard. Similarly, if 3 GB/s is written, it means SATA 2 standard.

Additionally, the SATA power cables protrude from the power supply unit and are supposed to be inside the computer case. On the other hand, the SATA data cables behind the subject can connect to the external SATA devices such as external hard drives through a SATA to eSATA bracket.

What is the SATA cable or serial ATA?

The full form is Serial Advanced Technology Attachment. SATA Cables refer to the long seven-pin cables with both the ends as flat and thin. One end plugs into a port of the Motherboard and the other end into the back of a storage device such as a SATA hard drive. These cables are straightforward to identify because they are flat and thin, and the ends are bent at a 90-degree angle for better cable management. So the SATA Data cables are required to connect to the SATA ports on the Motherboard and are essential to run the SATA storage drives.

SATA hard disks, SATA optical drives, SATA SSDs, etc., require the SATA power cable. Sometimes depending upon the build, more cables may be required. As mentioned earlier, a motherboard may have 4 or 6 SATA ports but may come with only 2 SATA data cables. You will need to buy more SATA Data cables separately in such cases. However, SATA power cables need not be separate. SATA Power Splitter cables turn a single SATA power connector from the PSU into multiple power connectors. Please note

  • Each additional SATA drive requires a separate power connector.

While the same cables and connectors used for current SATA implementations can connect SATA 6 GB devices, unless cheap knock-off cables are not used, the SATA connectors will be the same. However, it depends upon the motherboard model and SATA port version. For example, the latest motherboard model having all SATA 3 ports can easily connect to any port.

CONCLUSION

While significant queries regarding the SATA Cables in this article are addressed, please note that it is essential to understand their specifics fully. For instance, a SATA port may be rated for 3/6 GB/ second transfer rates. But this does not guarantee that these speeds can actually be attained. Sometimes to upgrade your hard disk drive to SDD, you can clone HDD to SSD via a USB. Alternatively, you can make it a secondary disk and clone HDD to SDD without using SATA to USB cable.

About the author

admin

Add Comment

Click here to post a comment